基于LabVIEW的砝码自动检定系统设计与实现

针对目前砝码检定工作操作过程复杂、检定效率低等问题,设计了一种基于LabVIEW的砝码自动检定系统。在符合砝码检定规程的情况下,系统实现了检定数据实时采集、数据处理、生成原始记录、管理标准器、查询历史数据和衡器控制等功能。相对现有的砝码检定方法有操作简单、高效、程序移植性好等优点。系统由主控计算机、串口转无线扩展卡、多台衡器设备及相应的标准砝码装置组成。通过使用串口转Wi-Fi模块,系统可实现控制多台衡器设备的需求。实验结果证明,系统运行稳定可靠,采集数据准确,容易扩展,且大幅度减轻了检定人员的劳动强度,在计量检定工作中具有一定的实用和推广价值。     

基于AltiVec技术的PowerPC处理器矢量运算性能测试

基于AltiVec技术的PowerPC处理器,在很多嵌入式信号处理领域已经取代传统的DSP处理器成为信号处理器件的首选。为了评估基于AltiVec技术的PowerPC处理器的矢量运算性能和信号处理能力,选取MPC8641D处理器为硬件测试平台,采用符合VSIPL标准的VSI/Pro Core矢量库和ixlibsav矢量库,通过测试复乘和FFT典型算法不同类型的运算时间,对AltiVec处理单元的矢量运算性能进行了测试评估。通过对测试结果的分析,基于AltiVec技术的PowerPC处理器具备强大的矢量运算处理性能,可以满足嵌入式数字信号处理技术对高性能处理器的需求。     

基于CAN总线的遥测数据处理模块软件设计

随着飞行器电子综合化技术的发展,数据总线在飞行器中得到大量应用。为满足某飞行器总线系统测量的需求,本文设计了一种基于CAN总线的遥测数据处理模块。硬件部分主要由CAN总线驱动器模块、DSP数字信号处理模块、FPGA逻辑处理模块组成。软件设计包括TMS320F28335的初始化,CAN总线数据处理和外部中断处理三部分。该模块用于某飞行器双路CAN总线数据的采集及处理,并经过了多次飞行试验验证。该模块简化了系统设计,实现了高速、可靠的CAN总线遥测数据处理。     

基于PCI总线的矩阵电路在压变温压补偿系统中的实现与应用

本文提出基于PCI总线驱动控制的矩阵电路在压力变送器温压补偿系统中应用的目的是解决现有压力变送器温压补偿系统中HART总线型工位电路数量少,整套矩阵电路缺失冗余性,以及现有电路在压力变送器产品温压补偿中实用性差、维护成本高的问题。文中阐述的矩阵电路是以PCI总线为基础,实现对PIO数字接口卡的驱动控制,完成由PCI总线上32路数字I/O到168路数字I/O的转换,并利用168路数字I/O进行继电器矩阵电路设计,实现了弱电控制强电的过程,成功有效的解决了现存压力变送器温压补偿系统中矩阵电路存在的问题。该研发成果已经应用于PDS压力变送器产品温压补偿生产线上,并且该电路的设计能够满足压力变送器生产企业的需求,而且整套电路融入系统中能够长期稳定、可靠的运行。     

基于机器视觉的移动工件抓取和装配的研究

针对工业生产线上某产品上下盖自动装配的问题,运用运动控制理论与机器视觉相结合,搭建了一套模拟工业生产线产品装配系统。首先利用工业相机对进入视场的工件进行单帧图像采集,获取图像数据;然后利用OpenCV对数字图像进行处理,包括中值滤波、阈值分割、孔洞填充、边缘提取来获取数字图像的特征;之后通过质心法结合矩形拟合计算出工件的质心坐标和偏转角度;最后引导六轴机械臂抓取产品的时候能根据图像处理结果进行纠偏和补偿。该系统采用平面棋盘格标定板对工业相机进行了标定,并且在线进行了验证,实验结果表明,工件抓取和装配成功率为100%,满足工业现场的装配精度要求。     

高速线性光采样用被动锁模光纤激光器重复频率优化

线性光采样是一种测量基于先进调制码型的高速光信号的有效手段, 而被动锁模光纤激光器是其实施所需的关键组件. 本文在介绍线性光采样工作原理的基础上, 首次分析得到被动锁模光纤激光器重复频率与待测信号光线宽的约束关系, 对于正交相移键控(QPSK)信号, 当信号光线宽与采样光脉冲重复频率的比值小于1.5×10^-3 时, 高速信号的相位噪声对线性光采样带来的损伤可以忽略不计. 利用95.984 MHz重复频率的被动锁模光纤激光器对线宽为100 kHz速率为28 Gbaud的QPSK信号开展相关实验, 通过标准数字相干接收算法可以得到与传统高速示波器相同的星座图, 理论分析与实验结果完全符合. 这一研究结果有助于线性光采样用被动锁模光纤激光器的优化设计.     

基于Stokes矢量的实时偏振差分水下成像研究

偏振差分水下成像能够有效地克服光散射效应造成的图像退化问题, 在水下物体探测与识别领域具有重要应用价值. 传统的偏振差分方法靠光学检偏器的无规则机械转动来实现对散射背景的共模抑制, 限制了其在水下成像过程中的实时探测性能. 本文通过分析偏振差分探测原理来建立偏振差分成像模型, 从理论上提出了基于Stokes矢量的计算偏振差分水下实时成像系统, 并进行了实验验证. 研究结果表明, 基于Stokes矢量的计算偏振差分成像不仅与传统的偏振差分方法具有相同的水下探测效果, 更重要的是可以实现快速成像过程. 该方法可以应用到目前的偏振成像仪器系统, 实现无需人-机互动的自动化实时偏振差分水下成像, 进一步提高水下物体探测与识别的效率.     

High pressure and thermal pasteurization effects on sweet cherry juice microbiological stability and physicochemical properties

This study evaluated high pressure processing (P1 – 400?MPa/5?min; P2 – 550?MPa/2?min) and thermal pasteurization (TP – 70°C/30?s) effects on sweet cherry juice's microbiological and physicochemical parameters, during four weeks of refrigerated storage. All treatments reduced the microbiological load to undetectable levels not affecting total soluble solids and titratable acidity. The pH increased with all treatments, however, it decreased during storage. Phenols were differently affected: TP increased them by 6%, P1 had no effect while P2 decreased them by 11%. During storage, phenols in control and TP samples decreased by 26% and 20%, P1 samples decreased them by 11% whereas P2 showed no variation. TP had no effect on anthocyanins, while pressure treatments increased them by 8%. Anthocyanins decreased during storage, particularly in the control and P1 (decreasing 41%). All treatments had no effect on antioxidant activity until the 14th day, thereafter high pressure processing samples showed the highest antioxidant activity.     

Large‐acceptance diamond planar refractive lenses manufactured by laser cutting

For the first time, single‐crystal diamond planar refractive lenses have been fabricated by laser micromachining in 300 µm‐thick diamond plates which were grown by chemical vapour deposition. Linear lenses with apertures up to 1 mm and parabola apex radii up to 500 µm were manufactured and tested at the ESRF ID06 beamline. The large acceptance of these lenses allows them to be used as beam‐conditioning elements. Owing to the unsurpassed thermal properties of single‐crystal diamond, these lenses should be suitable to withstand the extreme flux densities expected at the planned fourth‐generation X‐ray sources.     

Development of variable‐magnification X‐ray Bragg optics

A novel X‐ray Bragg optics is proposed for variable‐magnification of an X‐ray beam. This X‐ray Bragg optics is composed of two magnifiers in a crossed arrangement, and the magnification factor, M, is controlled through the azimuth angle of each magnifier. The basic properties of the X‐ray optics such as the magnification factor, image transformation matrix and intrinsic acceptance angle are described based on the dynamical theory of X‐ray diffraction. The feasibility of the variable‐magnification X‐ray Bragg optics was verified at the vertical‐wiggler beamline BL‐14B of the Photon Factory. For X‐ray Bragg magnifiers, Si(220) crystals with an asymmetric angle of 14° were used. The magnification factor was calculated to be tunable between 0.1 and 10.0 at a wavelength of 0.112 nm. At various magnification factors (M≥ 1.0), X‐ray images of a nylon mesh were observed with an air‐cooled X‐ray CCD camera. Image deformation caused by the optics could be corrected by using a 2 × 2 transformation matrix and bilinear interpolation method. Not only absorption‐contrast but also edge‐contrast due to Fresnel diffraction was observed in the magnified images.